Item
(sequence) Heading Description
(sequence) Heading Description
(13a)
Type
If the outage involved a transmission line Intentionally
switched out of service for operational reasons, insert
"
switched out of service for operational reasons, insert
"
i
." This code should be used only to designate the
condition of a line removed from service for control of
system voltage, reduction of light-load line charging,
or regulation of reactive-power distribution, but being
instantaneously available for reenergization and return
to normal service whenever required.
system voltage, reduction of light-load line charging,
or regulation of reactive-power distribution, but being
instantaneously available for reenergization and return
to normal service whenever required.
(13b)
Cause or Reason
Indicate the cause or reason for the outage, using only
the standard codings for this item given in section 4.7.2,
"CAUSE OR REASON CODES," of
the standard codings for this item given in section 4.7.2,
"CAUSE OR REASON CODES," of
If the outage was caused by an operator's action to
minimize or prevent damage to equipment, insert
"EDP," equipment damage prevention. If the cause or
reason for the outage was unknown, uncertain, or
undetermined, show "UNK."
minimize or prevent damage to equipment, insert
"EDP," equipment damage prevention. If the cause or
reason for the outage was unknown, uncertain, or
undetermined, show "UNK."
(14)
Remarks
Provide any pertinent remarks or comments considered
necessary to amplify preceding information.
necessary to amplify preceding information.
37
(FIST 1-3 12/89)